Power Option PCB
The Power Option Board provides the PMCP with the capability to measure and monitor load power: 3-Phase or 1-Phase current, Power Factor, and KW. Installation of the Power Option PCB is simple: just plug the PCB into a connector on the PMCP and then program the CT Ratio and you're ready to go.....It's that simple. The Power Option PCB is used in both Low and Medium voltage applications. Standard Features: Three phase or single phase TRUE RMS current sensing. Three phase or single phase Power Factor sensing. Three phase or single phase power sensing: Real Power (Kilowatt). Total power sensing: Real Power (Kilowatt). Operation in ABC or CBA phase rotation. Programmable CT input current. Current sensing accuracy is 1% of reading. CT shorting block included. Specifications: PCB measures 3.0 in. x 4.0 in. x 1.0 in. Note: To view the power information, you will require one of the following ETC accessories: Display Panel, Laptop (loaded w/ the ETC software), Handheld Progammer, or the Scada PC.
Installing the Power Option PCB into the PMCP Monitoring Load Power with the PMCP

Power Option PCB

The Power Option Board provides the PMCP with the capability to measure and monitor load power: 3-Phase or 1-Phase current, Power Factor, and KW. Installation of the Power Option PCB is simple: just plug the PCB into a connector on the PMCP and then program the CT Ratio and you're ready to go.....It's that simple.

The Power Option PCB is used in both Low and Medium voltage applications.

Standard Features:

Three phase or single phase TRUE RMS current sensing.

Three phase or single phase Power Factor sensing.

Three phase or single phase power sensing: Real Power (Kilowatt).

Total power sensing: Real Power (Kilowatt).

Operation in ABC or CBA phase rotation.

Programmable CT input current.

Current sensing accuracy is 1% of reading.

CT shorting block included.

Specifications:

PCB measures 3.0 in. x 4.0 in. x 1.0 in.

Note: To view the power information, you will require one of the following ETC accessories: Display Panel, Laptop (loaded w/ the ETC software), Handheld Progammer, or the Scada PC.

Installing the Power Option PCB into the PMCP

Monitoring Load Power with the PMCP

Home - Accessories - Quote Request - Technical Documents - Contact Us

ETC products are proudly made in the USA. UL listed.