Numeric keys (0-9) for selecting/programming.
Eight function keys used to program, monitor, and control:
Menu: |
Select all features (accessible from any screen). |
Meter: |
Display volts, amps, frequency, current, PF, KW. |
Program: |
Program parameters, settings and accessories. |
Next: |
Key used to advance to next field or screen. |
Test: |
Activate/cancel a transfer test. |
Delay Bypass: |
Cancel active running time delay. |
Status: |
View real time activities. |
LED Test: |
Turn on all status LED's. |
7 High Intensity Status Indicators:
Load on Normal: |
Load connected to Utility. |
Load on Emergency: |
Load connected to Emergency. |
Normal Source: |
Utility source available. |
Emergency Source: |
Emergency source available. |
Delay Active: |
A time delay is running. |
Engine Start: |
Controller has signaled to start the engine. |
Test Active: |
Controller is in test mode (red LED flashes). |
Mounting:
Mounts on the front of the cabinet door within minutes.
No large square cutout is required.
Easy to follow for mounting instructions.
The requirements for mounting the Display Panel are:
Drill 4 - 3/16 inch holes for mounting panel
Drill 1 - 1/4 inch hole and make 1 one inch diameter hole using a round hole punch (hole punch available from ETC): for phone cable interface.
Specifications:
Display measures 9.0 in. x 7.0 in. x 0.75 in.
Meets EIA RS232 standards.
Metal enclosure.
